Don't see your country? Join our mailing list and become the first to know when we begin shipping to your location.
Shinola’s first audio product is The Runwell Turntable, designed inside and out for the discriminating audiophile and easy to use by any music enthusiast. Featuring a built in phono preamplifier and a belt driven pulley with speeds of 33 1/3 rpm and 45rpm.
Produced in a limited run of 500 units.
Looking for the Rose Gold Runwell Turntable? Click here.
|Wow and Flutter|| |
35.4db @ 1KHz
|RIAA Conformance Deviation|| |
Less than +/- 0.25db, 20Hz to 20 KHz, exclusive of infrasonic filter at 13Hz
|Input Overload|| |
> 200mv at 1KHz
|Input Impedance|| |
47kohm in parallel with 200pf
|Signal-to-noise Ratio exclusive of cartridge intrinsic noise, unweighted|| |
|Gain 1kHz MM||35.4dB (jumpers open)|
|Gain 1kHz MC||55.1dB (jumpers installed)|
|Termination impedance, MM gain resistive||47kohm, via synthetic cooled termination|
|Equivalent temperature of 47kohm input termination, midband||< 20 degrees Kelvin|
|Termination impedance, capacitive||200pF on board|
|Termination impedance, MC gain resistive||installed on input pads per cartridge requirements|
|EQ characteristic||RIAA standard|
|Infrasonic filter||Second-order maximally-flat, -3dBr at 13Hz|
|Line-level output resistance||49.9 ohms, unmated|
|Overload margins||> 32dB at any frequency from 20Hz to 20kHz, based on reference levels of 5mV rms at 1kHz, 500uV rms at 20Hz, 50mV rms at 20kHz|
|Output noise, MM gain, at various analyzer filter bandwidths and 75 ohm generator Z|| 22Hz to 22kHz: 22uV rms|
100Hz to 22kHz: 12uV rms
400Hz to 22kHz: 8.6uV rms
|Output noise, MC gain, 10 ohm generator Z|| 22Hz to 22kHz: < 220uV rms|
100Hz to 22kHz: < 120uV rms
400Hz to 22kHz: < 86uV rms
|Power consumption from mains input, preamp only enabled||< 8W|
|Distortion at noise-versus-distortion inflection point||< 0.001%|
|Dimensions||18” x 13.875” x 7.5” (47.6cm x 35.2cm x 19cm)|