Select Your Country
Don't see your country?
Join our mailing list and become the first to know when we begin shipping to your location.
The Runwell Turntable
The Runwell Turntable, designed inside and out for the discriminating audiophile and easy to use by any music enthusiast. Featuring a built in phono preamplifier and a belt driven pulley with speeds of 33 1/3 rpm and 45rpm.
Looking for the Rose Gold Turntable? Click
Wow and Flutter
35.4db @ 1KHz
RIAA Conformance Deviation
Less than +/- 0.25db, 20Hz to 20 KHz, exclusive of infrasonic filter at 13Hz
> 200mv at 1KHz
47kohm in parallel with 200pf
Signal-to-noise Ratio exclusive of cartridge intrinsic noise, unweighted
Gain 1kHz MM 35.4dB (jumpers open)
Gain 1kHz MC 55.1dB (jumpers installed)
Termination impedance, MM gain resistive 47kohm, via synthetic cooled termination
Equivalent temperature of 47kohm input termination, midband < 20 degrees Kelvin
Termination impedance, capacitive 200pF on board
Termination impedance, MC gain resistive installed on input pads per cartridge requirements
EQ characteristic RIAA standard
Infrasonic filter Second-order maximally-flat, -3dBr at 13Hz
Line-level output resistance 49.9 ohms, unmated
Overload margins > 32dB at any frequency from 20Hz to 20kHz, based on reference levels of 5mV rms at 1kHz, 500uV rms at 20Hz, 50mV rms at 20kHz
Output noise, MM gain, at various analyzer filter bandwidths and 75 ohm generator Z 22Hz to 22kHz: 22uV rms 100Hz to 22kHz: 12uV rms 400Hz to 22kHz: 8.6uV rms
Output noise, MC gain, 10 ohm generator Z 22Hz to 22kHz: < 220uV rms 100Hz to 22kHz: < 120uV rms
400Hz to 22kHz: < 86uV rms
Power consumption from mains input, preamp only enabled < 8W
Distortion at noise-versus-distortion inflection point < 0.001%
Dimensions 18” x 13.875” x 7.5” (47.6cm x 35.2cm x 19cm) Read More
Every component and element of the Shinola Runwell Turntable was carefully sourced from manufacturers across the globe, then built at our new Shinola Audio factory in Detroit.