The Runwell Turntable

$2500

The Runwell Turntable, designed inside and out for the discriminating audiophile and easy to use by any music enthusiast. Featuring a built in phono preamplifier and a belt driven pulley with speeds of 33 1/3 rpm and 45rpm.


Please note this item ships flat rate ground for orders shipped within the contiguous United States.

Add to Wish List

This item will be available soon. Enter your info below and we’ll be in touch when the product is available.

Thank you!
You’ve been added to the waiting list and we’ll let you know the moment this product becomes available again.

This item only ships to the U.S. & Canada

The Runwell Turntable, designed inside and out for the discriminating audiophile and easy to use by any music enthusiast. Featuring a built in phono preamplifier and a belt driven pulley with speeds of 33 1/3 rpm and 45rpm.


Please note this item ships flat rate ground for orders shipped within the contiguous United States.

  • Wow and Flutter
    < 0.1%
  • Gain
    35.4db @ 1KHz
  • RIAA Conformance Deviation
    Less than +/- 0.25db, 20Hz to 20 KHz, exclusive of infrasonic filter at 13Hz
  • Input Overload
    > 200mv at 1KHz
  • Input Impedance
    47kohm in parallel with 200pf
  • Signal-to-noise Ratio exclusive of cartridge intrinsic noise, unweighted
    > 82db
  • Gain 1kHz MM 35.4dB (jumpers open)
  • Gain 1kHz MC 55.1dB (jumpers installed)
  • Termination impedance, MM gain resistive 47kohm, via synthetic cooled termination
  • Equivalent temperature of 47kohm input termination, midband < 20 degrees Kelvin
  • Termination impedance, capacitive 200pF on board
  • Termination impedance, MC gain resistive installed on input pads per cartridge requirements
  • EQ characteristic RIAA standard
  • Infrasonic filter Second-order maximally-flat, -3dBr at 13Hz
  • Line-level output resistance 49.9 ohms, unmated
  • Overload margins > 32dB at any frequency from 20Hz to 20kHz, based on reference levels of 5mV rms at 1kHz, 500uV rms at 20Hz, 50mV rms at 20kHz
  • Output noise, MM gain, at various analyzer filter bandwidths and 75 ohm generator Z 22Hz to 22kHz: 22uV rms
    100Hz to 22kHz: 12uV rms
    400Hz to 22kHz: 8.6uV rms
  • Output noise, MC gain, 10 ohm generator Z 22Hz to 22kHz: < 220uV rms
    100Hz to 22kHz: < 120uV rms
    400Hz to 22kHz: < 86uV rms
  • Power consumption from mains input, preamp only enabled < 8W
  • Distortion at noise-versus-distortion inflection point < 0.001%
  • Dimensions 18" x 13.875" x 7.5" (47.6cm x 35.2cm x 19cm)
More Information
SKU 20054632-sdt-000010900
Color Silver and Black
You May Also Like

We've detected that you are not in the U.S., would you like to switch your preferred currency?